typical performance data electrical specifcations maximum ratings coaxial connections sum port s port 1,2,3,4,5,6 1,2,3,4,5,6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 10w max. internal dissipation 0.875w max. dc current 1.5a(250ma for each port) outline drawing outline dimensions ( ) inch mm zb6pd-17 6 way-0 50 ? 600 to 1700 mhz power splitter/combiner rev. c m151107 zb6pd-17 hy/td/cp/am 151015 dc pass abcde f 3.50 3.00 .63 .125 3.375 1.50 88.90 76.20 16.00 3.18 85.73 38.10 gh j k wt .125 1.75 .32 .500 grams 3.18 44.45 8.13 12.70 180 case style: uu586 connectors model sma ZB6PD-17-S features ? wideband, 600 to 1700 mhz ? low insertion loss, 0.35 db typ. ? good isolation, 25 db typ. ? excellent output vswr, 1.1:1 typ. ? rugged, shielded case ? up to 10w power input as splitter applications ? vhf ? cellular ? pcn ? instrumentation zb6pd-17 total loss 8.0 8.1 8.2 8.3 8.4 8.5 8.6 600 820 1040 1260 1480 1700 frequency (mhz) total loss (db) s-1 (db) s-2 (db) s-3 (db) zb6pd-17 isolation 20 25 30 35 40 45 600 820 1040 1260 1480 1700 frequency (mhz) isolation (db) 1-2 (db) 1-3 (db) 4-6 (db) zb6pd-17 vswr 1.0 1.1 1.2 1.3 1.4 1.5 600 820 1040 1260 1480 1700 frequency (mhz) vswr #s vswr #1 vswr #3 vswr frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr 1 vswr 3 s-1 s-2 s-3 1-2 1-3 4-6 electrical schematic (dc through) port s rf+dc port 1 rf+dc port 2 rf+dc port n rf+dc freq. range (mhz) isolation (db) insertion loss (db) above 7.8 db phase unbalance (degrees) amplitude unbalance (db) vswr (:1) f l -f u ty p. min. ty p. max. max. max. s out ty p. max. ty p. max. 600-1700 25 18 0.35 0.9 7 0.5 1.22 1.6 1.15 1.35 600.00 8.14 8.20 8.10 0.17 24.86 21.42 21.37 0.89 1.40 1.03 1.03 650.00 8.11 8.17 8.08 0.17 28.02 23.40 23.34 0.98 1.33 1.04 1.03 700.00 8.07 8.14 8.05 0.16 33.38 26.20 26.15 1.06 1.24 1.06 1.04 750.00 8.06 8.14 8.04 0.17 44.76 30.67 30.58 1.16 1.17 1.08 1.06 800.00 8.06 8.12 8.04 0.16 35.26 39.39 39.02 1.26 1.14 1.09 1.08 900.00 8.08 8.14 8.07 0.15 27.65 32.72 33.49 1.43 1.15 1.11 1.10 1000.00 8.15 8.15 8.09 0.14 25.55 27.64 27.92 1.59 1.13 1.12 1.11 1100.00 8.22 8.20 8.15 0.13 24.41 24.85 24.97 1.77 1.19 1.13 1.12 1200.00 8.29 8.25 8.22 0.14 23.69 22.89 22.91 2.04 1.28 1.11 1.11 1300.00 8.32 8.28 8.27 0.15 24.22 22.40 22.38 2.33 1.28 1.07 1.09 1400.00 8.36 8.29 8.30 0.14 25.05 23.06 23.06 2.56 1.23 1.04 1.06 1500.00 8.35 8.27 8.29 0.14 23.98 24.06 24.12 2.64 1.21 1.04 1.04 1600.00 8.35 8.23 8.27 0.16 22.24 24.92 25.14 2.96 1.14 1.11 1.08 1650.00 8.35 8.22 8.27 0.18 21.48 26.02 26.38 3.05 1.06 1.15 1.11 1700.00 8.41 8.26 8.33 0.21 20.34 27.87 28.47 3.32 1.10 1.20 1.16 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db splitter loss. ht-series tight spot sma wrench from $24.95 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
